Projects Worldwide

freedom of form - Lightweight - Fire Resistant

[put_wpgm id=2]

Architecture

FACADE – HOTEL INSTANBUL

In the Sultanahmet area in the Turkish city Istanbul a succesful A1 project has been finished. Both the stone and wood facades are made of A1.

CEILING – MAHLER

The Mahler4 office tower is part of an expressive “High-Rise” urban development south of Amsterdam, named Zuid-As. Located in the proximity of the city centre. The ceiling is made of A1. Total surface area of 800 m2, none of the elements is exactly the same. Main reasons for using A1: – Lightweight by the use […]

THE END OF SITTING

The End of Sitting is an installation at the crossroads of visual art, architecture, philosophy and empirical science. In our society almost the entirety of our surroundings have been designed for sitting, while evidence from medical research suggests that too much sitting has adverse health effects. RAAAF [Rietveld Architecture-Art Affordances] and visual artist Barbara Visser have […]

BÀ NÀ HILLS – FRENCH VILLAGE

‘French Village’ located in the hills of Da Nang. The outskirts of Da Nang are about to get a significant, yet somewhat odd tourist attraction –  ‘French Village’ that looks like something straight out Louis XIV’s Versailles. The project, located on Bà Nà Mountain 46km southwest of Da Nang, stands on the site of a […]

Columns

Astonishing columns made of A1 (Acrylic One) by

Fly-over – BeConcrete

The Fly-over in Amersfoort – The Netherlands, made

Monumental façade – Kalverstraat Amsterdam

The

Benches – Stedelijk Museum

These design benches are made of A1 and can be

Art-Sculpture

FLOATING ARTWORK – STUDIO MAKY

Every year Studio Maky redesigns a new look of the floating artwork (Het Badkonijn) together with the children of community center “De Propeller’. Children were asked to design a new look/pattern for the giant floating object as a part of a social educational project. The floating artwork can be seen in the Vroesenpark in Rotterdam. […]

DER FLUGEL – ARMANDO

Armando made the sculpture ‘Der Flugel’ with A1 which is executed by Bronsgieterij Kemner and has been exhibited at “Paleis Soestdijk. For more information: – Armando – Bronsgieterij Kemner

Center of The Hague: Spui – Grote Markstraat – Kalvermarkt

The sculpture by Anno Dijkstra is titled “A Last Farewell’ and could be interpreted as a scuptural representation of a holiday snapshot: a tourist posing for a picture with an indian chief. Tourism is the only source of income enabling the ‘authentic’ Indian culture to survive. Two separate worlds come together in this three-dimensional ‘snaphot’. […]

SCULPTURE – BARTOSZ BANASIK

Self-portraits, made by Bartosz Banasik with A1. We create ourselves through people we know, who surround us. The sum of these meetings, relationships, and an open heart, allows us to be better.   A fine example of the possibilities of A1.   With this sculpture, he graduated from the Academy of Fine Arts in Krakau. […]

A1 STATUE – MARJA VENHUIZEN

This A1 statue, made by Marja Venhuizen, is placed in a private park of the villa Bosch en Vaart in Vries (The Netherlands). The external structure is made from A1 with addition from pigment and iron-powder. After the rust-process, it’s finished with A1 Sealer. The statue is 2.07 meter high. www.marjavenhuizen.nl

‘Fragments’ – Dylan Lewis

Dylan Lewis, born in Johannesburg in 1964, is a

Sculpture – Anna Egle

The A1 sculpture is made by the artist Anna Egle.

Sculpture – Hironori Kawabata

Hironori Kawabata, our distributor for Japan, made

Silke de Bolle

From her childhood Silke De Bolle has been

Facade

Brunetti Café Melbourne

TILES – HOTEL ISTANBUL

In the Sultanahmet area in the Turkish city Istanbul a succesfull A1 project in a hotel has been finished.  The interior was decorated with hundreds of Moors symbol tiles.

PANELS – CHURCH WITH TRAVERTINE DESIGN

The church in Dobieszowice (Poland) was recently renovated with A1 panels inside the building. Travertine design was chosen to create a natural stone look and feel. The lightweight panels where made in a silicon mould and nicely connected on side. The next part of the renovation will be the covering of the columns with the same […]

PANELS – PROTEA PLACE

Realization of Protea Place by Paragon Architects.   Protea Place is a commercial office building situated in the heart of Sandton CBD, South Africa.   Protea Place is an expertly architectural glass building, incorporating the latest materials and finishes to complement its unique design & architectural style. The panels are made out of A1 in […]

PANELS – APARTMENT BUILDING NIJMEGEN

For this renovation project in Nijmegen A1 was used for the outside panels. All panels made of A1, triaxial fibre and a mixture of yellow sand.

Bà Nà Hills – French Village

‘French Village’ located in the hills of Da Nang.

Façade – Hotel Johannesburg

Bath on 54 is a luxury hotel in

Panels – City of Arabia Dubai

Facade – Hotel Instanbul

In the Sultanahmet area in the Turkish city

Interior-Design

Perth

PANELS – AHOY ROTTERDAM

Ahoy Rotterdam, our biggest indoor event center asked for a wood panel look, combined with a red/orange coating. Also because of the fire retardant properties A1 was chosen, to replicate the fine wood structure of an original wooden panel.

IMG WORLDS OF ADVENTURE

IMG Worlds of Adventure is an upcoming indoor theme park (the largest indoor amusement park in the world) in the City of Arabia, Dubai, United Arab Emirates, and is part of the Dubailand entertainment complex. The park will be divided into four zones, each based on a different theme and will contain various leisure attractions […]

OILILY POP-UP STORE SCHIPHOL

Created by Colorful Licences and Additional.

SHOP WINDOW

The talented artist Mark Rozhencov designed a shop window for “Tale”,  a clothing and design shop in Riga. To give durability to the obejcts he chose to work with A1 in combination with triaxial fibre.

Decoration – Decoloft24

Decoloft24 is a company, specialized in wall

Pastry shop – Greece

The decoration on the pastry shop features

Columns

Astonishing columns made of A1 (Acrylic One) by

Coffee corner

Realization of a coffee corner and reception desk

Theming-Decoration

Perth

ASIA PARK – THEME PARK

Asia Park is a new theme park, in the centre of Da Nang city. This 27-hectare theme park, is located at Hoa Cuong Bac Ward in Hai Chau District. Asia Park includes a culture park, an amusement park and a multi-functional centre. The culture park will highlight replicas of famous architectural works and typical landscapes […]

THEMING – WATERPARK PLAYA DUINRELL

Tikibad of Duinrell has a new swimmingpool ‘Playa’ for children until the age of 12 years. Esthie Vormgeving & Decoratie has decorated Playa among others, A1 rocks, A1 bamboo panels, tiki houses, totem poles, game attractions and water sprayers!   The A1 rocks have been made by using different molds. These molds have been coated with […]

TIVOLI

The project Tivoli has been made of A1 in combination with glass fibre and solid polyurethane, with recessed lightning. Made by Ohlers Design.

ANGRY BIRD

One of the characters, out of the movie Angry Birds,  “George the red bird” has been placed in Athens biggest amusement park, Allou fun park. Made of A1 and painted afterwards.   www.setdesign.gr www.allou.gr

Bà Nà Hills – French Village

‘French Village’ located in the hills of Da Nang.

Pastry shop – Greece

The decoration on the pastry shop features droplets of melting chocolate on the outside wall. On the table in the pastry shop you will also find white melted choclate. Of course the chocolate is made out of A1. The droplets are created by HλIOS επιγραφές+εκτυπώσεις.

Surreal Things

‘Surreal Things’ has been created

Hands Meet and Shake – HMH

This project is made by Vorm &

Foundry

SUPPORT MOULD – THEATRICAL ARTS

  Both the support mold and the final object are made using A1 by Mr. Baltas Angelos from Theatrical Art Greece.   More info: https://www.facebook.com/Theatrical-Arts-206870746143272/ http://www.theatrical-arts.gr/

SUPPORT MOULDS – CHESS-PEAK

Tineke Kurvink created the head of a Chess-peak in clay. Of this clay model she made a silicone mould. To protect the silicone mould and keep it in the correct form she made the support mould in A1 with Triaxial firbre to produce strong and lightweight support moulds.

SUPPORT MOULDS – MICHAEL SCHULTZ

Michael Schultz Art Fabrication is a company, which fabricates sculptural works in collaboration with artists and other art projects. They are specialized in mould making and casting with a wide range of materials including A1.   More in info you will find at the website of Michael Schultz Art Fabrication.

SUPPORT MOULDS – A1 ROTATION

Support moulds – Tenax

Title: Autumn The

Support moulds – Richard van der Koppel 2

The support moulds are made of A1, just like the

Support moulds – Art Studio Sijen

Title Present Continuous

Support moulds – Richard van der Koppel

The entire proces of the sculptures, from the

A1-plaster

Bathroom wall

With Plaster Finish we created a strong

A1 Plaster

A1 Plaster is a high quality wall